According to some other users on the forums you can remove the printhead (use this guide if you are not sure how: Make sure the cartridges are removed from the printhead. However if you don't want to use the above method to connect, then you can connect the printer to the computer via USB cable and then install the drivers and print. Usually this is a result of dried/clogged ink nozzles in the printer or the printhead. This will connect your computer to the printer wirelessly and you should be able to install the printer drivers and print. Then go to your computer and click on the wireless icon in the task bar and you will see a network which starts with HPSETUP followed by the name or the model number of the printer, Please select that network and click on connect. To do so, please touch setup on the printer and then go to Network and then restore network defaults. Note: With this method, if your computer is connected to the router via Wi-Fi, then you will be disconnected from your router and will not have access to internet. If you are still unable to connect the printer to the network still, you can try to connect the printer to the computer via AdHoc or Auto Wireless Connect. Then restart the printer and try to connect the printer to the network. 1 REPLY sandytechy20 37,325 2,142 1,861 HP Support Agent 07-29-2019 10:51 AM Nzwisi Welcome to HP support community. Under wireless please enable 2.4 GHz. If 2.4 GHz is already enabled then make sure the wireless mode for 2.4 GHz is set to Mixed or 802.11 B/G/N and the Speed is set to Auto and the Wireless channel is set to 11 and click on Save or Apply. In order to resolve the issue, please access your router configuration page and then click on Wireless. The HP Photosmart Plus b209a only support 2.4 GHz. The procedures in this document should help with streaked or faded printouts, color or black ink not printing, documents with blurred or fuzzy text, ink streaks or smears, and other. The quality of a printed document or photo is not as expected. You might be experiencing this issue, if you have configured the router to only work on 5Ghz network. This document applies to the HP Photosmart Plus B209a, B209b, and B209c All-in-One Printer Series.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |